Tag Archives: Simplicity

Wide-leg denim trousers with zipper hidden in the pocket

I recently finished a modified version of Simplicity 3688.

Wide-leg denim trousers from Simplicity 3688.

Wide-leg denim trousers from Simplicity 3688.

This project had three new-to-me techniques:

  • Palmer/Pletsch’s fitting method.
  • Sandra Betzina’s zipper hidden in a pocket.
  • Faux flat-felled seams and the use of topstitching thread.

This is how it went:

Palmer/Pletsch’s fitting method

I used Palmer/Pletsch Pants for Real People as my guide. P/P fitting books recommend that you pin-fit the pattern tissue, then partially sew the garment and finish by fitting as you sew. Pin-fitting even reinforced pattern tissue seemed a little dicey to me, so I traced the pattern with Swedish tracing paper (which is really more like nonwoven interfacing than paper) and used the P/P fitting methods from there.

I was really  happy with the fit of the tracing paper version, but the fabric version somehow went awry. I think it’s because you fit only half the garment in tissue, and I didn’t end up with enough width by the time I cut it out in fabric and sewed the two halves together. P/P recommend 1-inch seam allowances, but I ignored that good advice. That would have saved the day. Instead, I sewed 3/8-inch seam allowances rather than the 5/8-inch allotted for a little more room. That improved the fit somewhat, and made all the faux flat-felled seams faster because there was no trimming necessary.

I also goofed up their excellent method for fitting a waistband. You cut and pin the waistband to fit you the way you like. No measuring involved! Then you attached the pants to it. Well, you’re supposed to fit the INTERFACED waistband to your waist. I missed that part, so I fit a stretch denim waistband to my waist. When I added the interfacing, it wasn’t so stretch anymore, so it ended up too tight. (At least it was too tight right at that moment. I’ve since lost 5 pounds, and the waistband fits a lot better.) But I did use their special waistband interfacing and the technique that goes with it. I love it! It will definitely be my go-to for straight waistbands in the future.

P/P have tips for fitting pretty much every figure variation you can think of. And it’s all illustrated in their book, showing real people and their real pants. But when I make — and fit — this pattern again (which I definitely will), I’ll make a muslin, then use their fitting methods from there. P/P are very successful with their pattern tissue fitting method, but I’m just more comfortable with fitting a sewn muslin.

I do like the overall shape of the pattern, so I think it will be fantastic once I fit it to me properly.

Sandra Betzina’s hidden zipper

I wanted to make wide-leg denim trousers, but I didn’t want a center front fly. Too much bulk in the wrong spot! A back zipper on denim trousers just seemed wrong. But I also wanted side pockets. I hate not having a pocket to slip my phone or keys into. So I scoured the Internet for a solution and found a reference to Sandra Betzina’s method for hiding a zipper opening within a side slash pocket. It sounded well worth the investment in a used copy of her book Power Sewing, where she illustrates the technique. Genius! I had to give it a go.

Well, what do you know? It worked. I’m not sure I love it, but it definitely worked. I bought both polyester and brass zippers because I couldn’t decide which to use. Once I was sewing, however, I knew I had to go with the brass for denim. It’s a little difficult to zip up pants inside a pocket, however. And with no back flap protecting my skin, I’ve nipped myself once or twice with those brass teeth. If the fit on the pants were better (say, looser), or I used a polyester zipper, it might be OK.

There's a zipper opening hidden in that pocket!

There’s a zipper opening hidden in that pocket! See the pulling at my tummy? All my pants do that. I do need to reduce the width into the waistband, but probably not where those darts are placed. Maybe just at the side seams.

See the zipper hiding in the pocket? Crazy, no?

See the zipper hiding in the pocket? Crazy, no?

Faux flat-fell seams

The construction was very straightforward, and I had some fun with the denim and topstitching.

I was very pleased at how the Fancy Damn Sewing Machine handled multiple layers of denim. It had to pause and collect itself twice when I pushed it a little too hard, but other than that, it sailed through the project without a hitch.

The faux flat-fell seam from the inside.

The faux flat-fell seam from the inside.

The faux flat-fell seam from the outside.

The faux flat-fell seam from the outside.

 

I have never done a flat-fell seam before, faux or otherwise. It’s a great technique for finishing denim seams. And I was really pleased with the how the topstitching went. I did opt mid-project to buy a proper topstitching needle. It has a bigger eye for the bigger thread, so it prevented the shredding of the thread I encountered a couple of times. I used the appropriate gold topstitching thread and love the way it looks. It wasn’t until I got to the hem that I remembered to increase the stitch length, so that area looks best.

IMG_5538

The topstitched hem.

I had purchased  a nice brass button for the closure but wasn’t sure how well a buttonhole would sew through denim and the interfacing, so I chickened out and did a hook-and-eye closure. I really need to sew in another set for the underlap.

All in all, it’s a successful project that just doesn’t fit as well as it should. Or perhaps as well as it will, as I’m back in weight-loss mode. I’ve lost five pounds since I fit the waistband. Who knows? Another 10 and it may fit great.

It is a great wide-leg pattern, however. I look forward to solving the fitting issues and making it again in denim (lighter blue with red topstitching?) and dressier fabrics (the wool crepe in the stash). I may have to give more thought to the pocket and closure, however.

The polka dot top — inside and out

The Simplicity 4047 top is finally finished! It took FOREVER, and I am SO over it. But I am excited to wear it to work for Halloween on Monday. A couple of the guys (!) picked out Mad Men for our department costume theme, so I’m all ready.

(The skirt is a Simplicity reproduction 1940s pattern, while the top is a Simplicity reproduction 1950s pattern, but I can make it all work for the early 1960s.)

I finished the last of the hand sewing last weekend. I’m really pleased with how it turned out and particularly how nice it looks on the inside because of the underlining. Plus, I made a belt. How cool is that? Let’s take a tour …

The polka dot top all done

The outfit is all done, finally! Check out that snappy matching belt. Can you tell the crochet lace at the sleeves is different from the lace on the neck? No? Perfect! 

polka dot top inside front

The inside, from the front. How tidy does that look?

polka dot top, inside back

The inside, from the back. No serger was involved. Yay!

polka dot top, catch stitching

A close up of the hem. Check out that crazy catch-stitching. It’s the first time I’ve done that. I like it.

And as a sneak peek for my Halloween ensemble, here is the jewelry I’ll wear:

Halloween jewelry

You can never go wrong with pearls. Never.

And the accessories:

the accessories

I had the shoes and gloves, but the purse is a $7 acquisition specifically for the occasion.

All I need to do is tease my hair a bit, and the outfit skews early 1960s, but I’ll go more 1940s when I wear it on a regular day.

There were tons of lessons learned on this project, but I’ll save that for another post. Also coming soon, the mood board for the next top, which is a wearable muslin. After all this, it’s time for some quick sewing gratification!

The polka dot skirt, inside and out

I finished the polka dot skirt and got a little fancy as I was working on the lining.

As I mentioned previously, I converted the pattern to a contour waistband and wasn’t quite sure how to attach the lining. The zipper being attached after the waistband definitely complicated matters. In the end, I decided to attach the waistband facing to the lining, then sew the fashion fabric layer and lining layer together using a technique shown in a tutorial on the Coletterie blog.

I still wanted to anchor the two layers together at the waistband and skirt seam, so I sewed them together by hand from inside, between the layers. I’m quite happy with how that worked out.

Finished polka dot skirt

The finished skirt

The lining got a little fancy when I decided to sew the hem with some decorative stitching. I think the inside came out about as nice as the outside.

The polka dot skirt inside

The inside

Hem detail

Detail of the hem

There are, however, some things I will definitely do differently when I use this pattern again.

First, I would remember to grade the seam allowances in the waistband. What was I thinking? I got so wrapped up in knowing I was close to finishing that I forgot that step entirely. I remembered as I was understitching the top waistband seam, but by then it was just too late to regroup. Thus, the corners near the zipper are not things of beauty.

Second, I would make the lining a little longer. The hem allowance is 1 1/4 inches, and the lining is 1 inch shorter. It would have benefited from being only 3/4 of an inch shorter. I think a bit of my overcasting on the hem edge is showing below the lining in a few spots.

Most importantly, however, I’d do a much better job with the zipper insertion, which is sadly lame. Please do not fault the technique, merely my execution! The evidence speaks for itself:

Zipper outside

The not-so-invisible zipper

The zipper inside

And the most horrifying part, the zipper from the inside!

As it turns out, I didn’t leave enough room for the hook and eye, which I’ve never been particularly good at sewing on. I may take it back off, but it’s easier to pull up an invisible zipper when you use a hook and eye.

All in all, a nice skirt. I may even wear it tomorrow. I am very happy with my conversion of Simplicity 3688 from a straight to a contour waistband. I don’t think it’s period-appropriate for a reissued 1940s pattern, but it sure is more appropriate for my apple-ish figure.

I hope to finish the matching top before the crisp fall weather shows up, but we’ve had such a cool summer here in Northern California, I may not have much time.

%d bloggers like this: